Go Back   Hayabusa.oRg > Hayabusa Ride Faster > Gen II Busa Information


Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 01-07-2008, 09:22 AM
ks-waterbug's Avatar
Group Buy Guy
 
Join Date: Dec 2002
Location: Kansas
Group: Super Moderators
Posts: 10,638
Default Report your 08/09 Busa Issues here.

I'll start it off by saying I love the new ride and really enjoy riding this thing. Now for the bad news my FI light keeps coming on when I throttle quickly to at least 6k rpm. The bike is bone stock and has less than 200 miles on it now (growing everyday). Anyone else experiencing this or something unique to their ride? Post them up here...

1. FI light keeps coming on
2. false neutral/shifting probs (hard to get into gear from neutral)
3. Poor tire/tyre choice from the factory
4. fit up of fairing assemblies and removal!
5. Speedo issues
6. Faulty battery
7. bad headlight bulbs
8. Clutch hub and lines
9. Steering lock won't release
10 Ticking noise from engine
11. Hot starts difficult
12 Bike will not shift from 5th to 6th without going to neutral.
13 Clutch Spring Bolts make contact with engine case after break- in..... GRINDING NOISE CAN BE HEARD!

______________________________________
2000 Hayabusa, Blue
1397cc (A.P.E.) 13:1; HMF BigBird exhaust
Brock Cams Stg II/PCIIIUSB; RPM Fuel system/JohnnyCheese Tuned/Tested! Race Tech Suspension/Carrozzerria Wheels; Passport/Bel/Blinder Lasar jammer
2006 FLSTC-I Heritage Softail
2008 FLHTCUI Ultra Classic
2008 Hayabusa, Blue
Yosh TRC full system, Bagster, Passport 8500 w/screamer, & LI Jammer
Buell pegs, Pazzo levers, Zumo GPS, Ventura bags

Last edited by ks-waterbug; 10-26-2008 at 09:48 AM.
Reply With Quote
  #2 (permalink)  
Old 01-07-2008, 12:06 PM
Warchild's Avatar
Top Gun
 
Join Date: Nov 2007
Location: High Desert in southeast Washington state
Group: Members
Posts: 1,076
Default

Hater.

Trying to incite the fanboys, aren't 'cha? The K8 is perfect right out of the crate....



Alright, on a serious note.... here's a small annoying issue I have that is not a show-stopper by any means, but is increasingly irritating: the cold start properties appear to be crap.

Symptoms: The first start in the morning (or whenever the bike is complete cold), I'll turn the ignition on, let the needles sweep through their test, wait an additional 3-4 seconds to allow the fuel pump to completely pressurize the rails, then thumb the starter.

The bike fires within a couple spins, and idles "okay" around 1300-1400 RPM for the first 1-2 seconds, then falls down to about 900-1000 RPM range and barely stumbles along for a good 5-7 seconds, and feels like it's going to cut out at any moment. After that, it's like the ECU "wakes up" and realizes "oh yeah, I am supposed to be in cold start mode", and picks up the idle to a more appropriate 1300-1500 RPM and keeps it there until the engine is a bit more warmed up, where upon it drops back down to the typical 1100 RPM range.

Like I say, not a huge problem.... perhaps it'll be just fine when it's not starting in winter ambient temps....

______________________________________
Reply With Quote
  #3 (permalink)  
Old 01-07-2008, 12:17 PM
ks-waterbug's Avatar
Group Buy Guy
 
Join Date: Dec 2002
Location: Kansas
Group: Super Moderators
Posts: 10,638
Default

Yea forgot about that one too.

______________________________________
2000 Hayabusa, Blue
1397cc (A.P.E.) 13:1; HMF BigBird exhaust
Brock Cams Stg II/PCIIIUSB; RPM Fuel system/JohnnyCheese Tuned/Tested! Race Tech Suspension/Carrozzerria Wheels; Passport/Bel/Blinder Lasar jammer
2006 FLSTC-I Heritage Softail
2008 FLHTCUI Ultra Classic
2008 Hayabusa, Blue
Yosh TRC full system, Bagster, Passport 8500 w/screamer, & LI Jammer
Buell pegs, Pazzo levers, Zumo GPS, Ventura bags
Reply With Quote
  #4 (permalink)  
Old 01-07-2008, 12:35 PM
BusaWizard's Avatar
On a Steel Horse I ride.


 
Join Date: Dec 2005
Location: Kansas City, Mo.
Group: Donating Member
Posts: 10,356
Default

Good things to know so when I get mine. Keep them coming guys, good info for all.

______________________________________
If you're not living close to the edge, then you're taking up too much space.
Fast is easy. Quick is hard.
Reply With Quote
  #5 (permalink)  
Old 01-07-2008, 01:21 PM
Scar's Avatar
BusaStampede Rally Master


 
Join Date: Jun 2007
Location: San Diego // Phoenix
Group: Super Moderators
Posts: 11,270
Default

I don't have any problems with my '08, but I'll keep checking in...

Good luck, ya'llz...

______________________________________
Reply With Quote
  #6 (permalink)  
Old 01-07-2008, 01:51 PM
silverfreak's Avatar
Rookie
 
Join Date: Aug 2005
Location: Odessa Tx
Group: Members
Posts: 214
Default

No issues here.just the cold idle after startup.wants to fall on its face for few seconds till the computer picks it back up.was told by dealer mechanic that it was normal.every new 08 busa will do the same thing.

______________________________________
2003 gray&silver, kws 1397kit,13/1 je pistons,webb cams/ported head.ape cam chain adjuster,micron full header,pc111rusb,large airbox mod,pair block off plates,bmc race filter.kennedy adjustable lowering links,schnitz lowering straps,bde clutch mod,tsubaki sigma chain. 2008 blue/black busa.waiting for accesories to be available
Reply With Quote
  #7 (permalink)  
Old 01-07-2008, 04:55 PM
BusaJim08's Avatar
Rookie
 
Join Date: Jan 2008
Location: Muskogee, Oklahoma
Group: Members
Posts: 105
Default

I love my 08 Busa just had the 500 mile checkup and oil change. I am real happy about finally being able to open up past 5000 rpms. I am having the 5th to 6th gear false nuetral issue. it seams to be okay with quick shifting from gears 1-5 but really wants a solid longer shift from 5-6 and if I dont it sounds like hell and sits in a false nuetral for what seems like 2-3 minutes but is only 3-4 seconds. I have heard that this settles down after the first couple 1000 miles.

______________________________________
2008 Busa - Black/Grey
Black FZR 1000
Black Katana 600
Black Honda Spada (While living in Japan)
Reply With Quote
  #8 (permalink)  
Old 01-07-2008, 05:10 PM
brandue's Avatar
New Recruit
 
Join Date: Nov 2007
Location: Fl
Group: Members
Posts: 63
Default

I have noticed something that is annoying and it's kind of hard to explain. When I am cruising around 3500 to 4000 rpms, I feel like my bike is being pushed back, like wind is pushing against it. The bike seems like it isn't tuned to well from the factory. Those are not rpms I am at alot, but when you're running 45 mph it's hard to want to get out third gear...
Reply With Quote
  #9 (permalink)  
Old 01-07-2008, 05:51 PM
Elganja's Avatar
Seasoned Pilot
 
Join Date: Dec 2007
Location: Herndon, VA
Group: Members
Posts: 378
Default

Quote:
Originally Posted by BusaJim08 @ Jan. 07 2008, 4:55 PM
I love my 08 Busa just had the 500 mile checkup and oil change. I am real happy about finally being able to open up past 5000 rpms. I am having the 5th to 6th gear false nuetral issue. it seams to be okay with quick shifting from gears 1-5 but really wants a solid longer shift from 5-6 and if I dont it sounds like hell and sits in a false nuetral for what seems like 2-3 minutes but is only 3-4 seconds. I have heard that this settles down after the first couple 1000 miles.
I have a similar issue with mine. Shifting from Neutral to 1st is difficult sometimes. It gets to the point where I have to go to 2nd to get moving. But once I am moving I can get back down to 1st with no issues.

Seems to be 1 out of every 10 times I try to go from N to 1 I get this issue.

______________________________________
2008 Suzuki Hayabusa - My Modifications - My Track Times
Reply With Quote
  #10 (permalink)  
Old 01-07-2008, 05:59 PM
05 Busa LE's Avatar


 
Join Date: Oct 2005
Location: Philly
Group: Donating Member
Posts: 4,022
Default

So no fast idle (manual) lever on the '08's?
Reply With Quote
  #11 (permalink)  
Old 01-07-2008, 06:02 PM
Warchild's Avatar
Top Gun
 
Join Date: Nov 2007
Location: High Desert in southeast Washington state
Group: Members
Posts: 1,076
Default

Quote:
Originally Posted by 05 Busa LE @ Jan. 07 2008, 2:59 PM
So no fast idle (manual) lever on the '08's?
No, there is not.

______________________________________
Reply With Quote
  #12 (permalink)  
Old 01-07-2008, 06:02 PM
Professor's Avatar
Hayabusa Immortal

 
Join Date: Nov 2004
Location: Oklahoma City
Group: Administrators
Posts: 6,278
Default

Quote:
Originally Posted by Elganja @ Jan. 07 2008, 4:51 PM
I have a similar issue with mine. Shifting from Neutral to 1st is difficult sometimes. It gets to the point where I have to go to 2nd to get moving. But once I am moving I can get back down to 1st with no issues.

Seems to be 1 out of every 10 times I try to go from N to 1 I get this issue.
Are you downshifting to 1st gear before you come to a stop? You should be.

______________________________________
03 AE
2006 PMRA Street E/T Champion
2007 PMRA Street E/T Champion
Pipe and stock arm Fat Old man 9.90 @ 139.16
Room for improvement!
A bit longer and a bit of motor work 9.36 @ 147.39
Reply With Quote
  #13 (permalink)  
Old 01-07-2008, 06:34 PM
BadWeather's Avatar
Rookie
 
Join Date: Nov 2007
Location: Appleton, WI
Group: Members
Posts: 209
Default

How about the poor tires or at least in semi-cold weather.

______________________________________
2008 Blue/Gold Busa
Spiegler SS Brake and Clutch lines
Tobin Seat
PCIIIUSB
Brock Alien Head exhaust
Power Bronze DB
Pazzo Race Levers
Buell rear sets
Back Off Brake modulator
45T Vortex rear
Hot Bodies Smoke lens
Side mounted licence
Reply With Quote
  #14 (permalink)  
Old 01-07-2008, 06:35 PM
Elganja's Avatar
Seasoned Pilot
 
Join Date: Dec 2007
Location: Herndon, VA
Group: Members
Posts: 378
Default

Quote:
Originally Posted by Professor @ Jan. 07 2008, 6:02 PM
Quote:
Originally Posted by Elganja @ Jan. 07 2008, 4:51 PM
I have a similar issue with mine. Shifting from Neutral to 1st is difficult sometimes. It gets to the point where I have to go to 2nd to get moving. But once I am moving I can get back down to 1st with no issues.

Seems to be 1 out of every 10 times I try to go from N to 1 I get this issue.
Are you downshifting to 1st gear before you come to a stop? You should be.
yes, i down shift all the way down to first. but if i am at a redlight or something i put it in N and take a stretch break.

when it's time to move again and i attempt to put it in 1 that is when I have the issue. It's quite embarrassing...




______________________________________
2008 Suzuki Hayabusa - My Modifications - My Track Times
Reply With Quote
  #15 (permalink)  
Old 01-07-2008, 09:09 PM
busacaptain's Avatar
Formerly LiquidtySplit
 
Join Date: Nov 2007
Location: FL, NY, NJ
Group: Members
Posts: 442
Default

Elganja, I've found on mine if I hold the clutch in for a few seconds before shifting to first at a light I have to release the clutch in neutral again and then shift.

______________________________________
08 Blk/Gry
Yosh TRS Titainium Full System w/PC V w/Autotune
Cruise Control
HID Low/High
Hump Glove Box
Reply With Quote
  #16 (permalink)  
Old 01-07-2008, 09:25 PM
silverfreak's Avatar
Rookie
 
Join Date: Aug 2005
Location: Odessa Tx
Group: Members
Posts: 214
Default

Quote:
Originally Posted by BadWeather @ Jan. 07 2008, 3:34 PM
How about the poor tires or at least in semi-cold weather.
Oh yea.tires definately suck.good for rolling burnouts though.

______________________________________
2003 gray&silver, kws 1397kit,13/1 je pistons,webb cams/ported head.ape cam chain adjuster,micron full header,pc111rusb,large airbox mod,pair block off plates,bmc race filter.kennedy adjustable lowering links,schnitz lowering straps,bde clutch mod,tsubaki sigma chain. 2008 blue/black busa.waiting for accesories to be available
Reply With Quote
  #17 (permalink)  
Old 01-07-2008, 09:28 PM
Seasoned Pilot
 
Join Date: Jan 2008
Location: Lacey, Washington
Group: Members
Posts: 312
Default

Quote:
Originally Posted by silverfreak @ Jan. 07 2008, 10:51 AM
No issues here.just the cold idle after startup.wants to fall on its face for few seconds till the computer picks it back up
have them check to see if the 'busa is affected by the idle air control motor change that affected all the K7 GSXR1000s
Reply With Quote
  #18 (permalink)  
Old 01-07-2008, 09:36 PM
silverfreak's Avatar
Rookie
 
Join Date: Aug 2005
Location: Odessa Tx
Group: Members
Posts: 214
Default

Quote:
Originally Posted by heykenny @ Jan. 07 2008, 6:28 PM
Quote:
Originally Posted by silverfreak @ Jan. 07 2008, 10:51 AM
No issues here.just the cold idle after startup.wants to fall on its face for few seconds till the computer picks it back up
have them check to see if the 'busa is affected by the idle air control motor change that affected all the K7 GSXR1000s
that will be worth looking into.good call.

______________________________________
2003 gray&silver, kws 1397kit,13/1 je pistons,webb cams/ported head.ape cam chain adjuster,micron full header,pc111rusb,large airbox mod,pair block off plates,bmc race filter.kennedy adjustable lowering links,schnitz lowering straps,bde clutch mod,tsubaki sigma chain. 2008 blue/black busa.waiting for accesories to be available
Reply With Quote
  #19 (permalink)  
Old 01-07-2008, 10:20 PM
Warchild's Avatar
Top Gun
 
Join Date: Nov 2007
Location: High Desert in southeast Washington state
Group: Members
Posts: 1,076
Default

Quote:
Originally Posted by BadWeather @ Jan. 07 2008, 3:34 PM
How about the poor tires or at least in semi-cold weather.
No question. Particularly in the cold.

<div class="iF-Passage"><div class="QUOTEHEAD">Quote:</div><div class="QUOTE clearfix"><span class="quoteBegin"> </span>
have them check to see if the 'busa is affected by the idle air control motor change that affected all the K7 GSXR1000s[/quote]

Affected all the K7 GSXR1000s..... how, specifically?

The same poor cold start characteristics described here for the K8 Busa?

Or some other misbehavior?

______________________________________
Reply With Quote
  #20 (permalink)  
Old 01-07-2008, 10:29 PM
Seasoned Pilot
 
Join Date: Nov 2007
Location: Sarasota Fl
Group: Members
Posts: 423
Default

The one thing that bugs me is the piss poor fit around the front plastics just below the handlebar area...big ugly gaps and I cant get rid of em... It needs fixing..
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Report your 2008 Busa issues to Feds Lycan Gen II Busa Information 28 02-13-2008 04:56 AM
First weekend Busa report. Dennis The Menace New Owners Forum 11 10-02-2007 04:05 PM
Ride report on my busa yamahor General Bike Related Topics 5 05-17-2006 06:04 PM
Transmission Issues on 2005 Busa sccrvettel82 Busa problems 0 07-20-2005 12:00 PM
Issues to be wary of when buying second hand Busa aussie Busa problems 13 05-27-2005 11:01 AM


All times are GMT -5. The time now is 09:49 AM.


(c) 1999-2009 Hayabusa Owners Group