Page 1 of 2 1 2 LastLast
Results 1 to 20 of 23
  1. #1
    New Recruit AK Addict's Avatar
    Join Date
    May 2009
    Location
    Port Crane, NY
    Posts
    93

    Default Plug and Play Teather Kill Switch?

    OK guys I'm taking my 09 to the track and need a kill switch. I hate the thought of cutting any wires so I'm looking for suggestions for a plug and play unit. BTW here she is.


  2. #2
    Professional Pilot kinda sorta
    fast08busa's Avatar
    Join Date
    May 2010
    Location
    Goodyear Arizona
    Posts
    1,435

    Default Re: Plug and Play Teather Kill Switch?

    I dont think ive ever heard of something like that, i did mine on my own and had to cut wires it wasnt that bad. Im not technically savvy by any means either.

  3. #3
    Rookie
    Join Date
    May 2002
    Posts
    225

    Default Re: Plug and Play Teather Kill Switch?

    They do make them but its not a bad job to cut 1 wire that runs out of our kill button housing ( orange wire) and add the kill wires. Might take you all of 10mins total to hook it up.

  4. #4
    Hayabusa Immortal
    Professor's Avatar
    Join Date
    Nov 2004
    Location
    Oklahoma City
    Posts
    9,115

    Default Re: Plug and Play Teather Kill Switch?

    I've never seen one but it sounds like a task for smithabusa to build a harness. The connectors might make it to expensive for people to be willing to pay the price however.
    03 AE

  5. #5
    Professional Pilot H2447INTX's Avatar
    Join Date
    Apr 2007
    Location
    ANGLETON
    Posts
    545

    Default Re: Plug and Play Teather Kill Switch?

    no if greg was to build it it would be fairly cheap im sure, just not sure wher it would plug into

    i guess the wires have a plug someplace down the line, he could splice into, and then just run the kill switch off the bars somplace ,

    its the mounting bracket that cost so much

    i got mine off the site for 50 bucks was a PMR and yes they are super simple to install

    only problem is they go with the bike if you sell it

  6. #6
    Rookie
    Join Date
    May 2002
    Posts
    225

  7. #7
    Lily's Daddy
    djsin's Avatar
    Join Date
    Dec 2008
    Location
    Mishawaka Indiana
    Posts
    5,524
    Images
    34

    Default Re: Plug and Play Teather Kill Switch?

    do what i did...unsolder the 2 wires from the inside of the original on/off kill switch and re-solder them to the 2 wires from the new kill switch. no cuting necessary and all the soldered wires can still be hidden under the control lever housing. when u take it back off just re-solder the wires back to the button I also did this on the other side..took wires off the pass button...heat shrunk them so they wouldnt touch anything..then soldered on the wires that go to my nos solenoid ... and now the pass button really means pass
    Last edited by djsin; 08-24-2010 at 07:15 PM.
    ♬ ♫ ♪ ılıll|̲̅̅●̲̅̅|̲̅̅=̲̅̅|̲̅̅●̲̅̅|llılı ♪ ♫ ♬

  8. #8
    Seasoned Pilot

    jeff355's Avatar
    Join Date
    Mar 2010
    Location
    Lakeshore Ontario
    Posts
    439

    Default Re: Plug and Play Teather Kill Switch?

    I have the 1 Pat linked ya to from Ryan at Schnitz. Super easy and NO splicing. The only way to fly. Oh, its on my Gen 1
    Attached Images Attached Images  
    2000 Hayabusa Lakeshore Ontario Canada
    stretched 7over, Ball Z extensions, lowered by Soupys front and rear ,k&n filter, 17/40, mototeck undertail, Brocks/Hindle exhaust, shinkos, owner/admin @www.eccrotchrocket.com

  9. #9
    New Recruit
    Rip777s's Avatar
    Join Date
    Mar 2009
    Location
    Costa Messa, CA 92626
    Posts
    60

    Default Re: Plug and Play Teather Kill Switch?

    Killswitchs

    Looks like the Schnitz without the harness.

  10. #10
    Hayabusa Immortal

    Join Date
    Jul 2003
    Location
    Stockbridge, MI
    Posts
    3,400

    Default Re: Plug and Play Teather Kill Switch?

    yep they go into the kickstand connector
    www.boostbysmith.com

    Boostbysmith builds many busa products including shift lights, gear indicators, gps mods for de-restriction, NOS gps mods for gear based activation, 2 step rev limiters, plug and play accessory power harnesses. ALso sell KPS heavy duty cush drive rubbers.

    sales@boostbysmith.com

  11. #11
    Seasoned Pilot r1d3on3's Avatar
    Join Date
    Nov 2008
    Location
    Lubbock, Tx
    Posts
    403

    Default Re: Plug and Play Teather Kill Switch?

    I got an mps ks and just ran the wires into the run/off switch box and soldered in. Easy as pie, and the best part is no one can even see how crappy of a soldering job you did
    Faster, faster, faster, until the thrill of speed overcomes the fear of death...

    197.3 mph March 2010 Texas Mile
    192.9 mph October 2011 Texas Mile
    9.89 @ 141 mph Caprock Motorplex, Penwell, Tx

  12. #12
    GODSPEED RACING

    frisbee's Avatar
    Join Date
    Mar 2002
    Location
    Tacoma ,Wa.
    Posts
    16,515

    Default Re: Plug and Play Teather Kill Switch?

    Doesn't the busa have a tipover kill switch built in already ?
    second place is just a name for the first loser

    Goldenchild/@ Cloud Nine built 1397 motor 198 RWHP 244 w/NOS. 3-9" Thompsons arm, BMC Filter, Adjustable Rear Links, 1" Reapers Risers, HID Low beam, Leo Vince full TI , Pusher clutch cover, Airtech Tank and extended tail. Over 55,000 miles and 39 states.

  13. #13
    Hayabusa Master Dozerdriver's Avatar
    Join Date
    Jul 2008
    Location
    Maryland
    Posts
    1,923

    Default Re: Plug and Play Teather Kill Switch?

    Quote Originally Posted by frisbee View Post
    Doesn't the busa have a tipover kill switch built in already ?
    Yes... but at the track they might stay up on 2 wheels for awhile
    2008 hayabusa, Tsukigi cannon exhaust, K&N race filter, Bazzaz FI unit, and HPC custom tuned STD 189.23 HP 110.38 TQ pump gas.

  14. #14
    Seasoned Pilot r1d3on3's Avatar
    Join Date
    Nov 2008
    Location
    Lubbock, Tx
    Posts
    403

    Default Re: Plug and Play Teather Kill Switch?

    Quote Originally Posted by Dozerdriver View Post
    Yes... but at the track they might stay up on 2 wheels for awhile
    how long would it take for a busa to finally stop by itself from a 150+mph roll.

    You could just find you an outlaw track bro, go out there in flip flops and t-shirt and give it hell. at least thats how the two i've been to were. well, the last time i went to ours, i take it back, they did do a tech, if no fluids were under the bike you were gold.
    Faster, faster, faster, until the thrill of speed overcomes the fear of death...

    197.3 mph March 2010 Texas Mile
    192.9 mph October 2011 Texas Mile
    9.89 @ 141 mph Caprock Motorplex, Penwell, Tx

  15. #15
    Rookie george b's Avatar
    Join Date
    May 2010
    Posts
    220

    Default Re: Plug and Play Teather Kill Switch?

    do they test it?? i was reading on motohouston about people going to academy/walmart and picking up a kill tether for a boat, just velcro-ing it to the bike and faking it. and what the guy above said, some tracks are saying the tipover sensor is good enough.

  16. #16
    New Recruit AK Addict's Avatar
    Join Date
    May 2009
    Location
    Port Crane, NY
    Posts
    93

    Default Re: Plug and Play Teather Kill Switch?

    Thanks for the replys, guess I'll try the schnitz.

  17. #17
    Bling Free
    Jaysus's Avatar
    Join Date
    Jan 2009
    Location
    Just south of the 4th largest US city
    Posts
    626

    Default Re: Plug and Play Teather Kill Switch?

    I've got the PMR on my blackbird
    Just what I needed........ a faster bike!

  18. #18
    Lily's Daddy
    djsin's Avatar
    Join Date
    Dec 2008
    Location
    Mishawaka Indiana
    Posts
    5,524
    Images
    34

    Default Re: Plug and Play Teather Kill Switch?

    Quote Originally Posted by r1d3on3 View Post
    how long would it take for a busa to finally stop by itself from a 150+mph roll.

    You could just find you an outlaw track bro, go out there in flip flops and t-shirt and give it hell. at least thats how the two i've been to were. well, the last time i went to ours, i take it back, they did do a tech, if no fluids were under the bike you were gold.
    someone did it at the texas mile at 200 mph..i believe the bike ran for a long way before falling over
    ♬ ♫ ♪ ılıll|̲̅̅●̲̅̅|̲̅̅=̲̅̅|̲̅̅●̲̅̅|llılı ♪ ♫ ♬

  19. #19
    New Recruit
    Join Date
    Apr 2007
    Location
    Northern Virginia
    Posts
    73

    Default Re: Plug and Play Teather Kill Switch?

    Hey guys, looking to do the kill switch this week - I've got the one that plugs directly into the kickstand switch.

    What's the easiest way to access the plug for the switch? I popped the switch off but the plug doesn't go right into it (I'm assuming the harness extends into the fairing somewhere).

    Thanks!

  20. #20
    Hayabusa Immortal

    Join Date
    Jul 2003
    Location
    Stockbridge, MI
    Posts
    3,400

    Default Re: Plug and Play Teather Kill Switch?

    there should only be 1 two pin connector for sidestand, i remember a while back hearing of some that were shipped with incorrect connector, take a pic
    www.boostbysmith.com

    Boostbysmith builds many busa products including shift lights, gear indicators, gps mods for de-restriction, NOS gps mods for gear based activation, 2 step rev limiters, plug and play accessory power harnesses. ALso sell KPS heavy duty cush drive rubbers.

    sales@boostbysmith.com

Page 1 of 2 1 2 LastLast

Similar Threads

  1. MPS teather kill
    By bowwow in forum Track and Racing mods
    Replies: 10
    Last Post: 08-19-2010, 02:22 PM
  2. Mps teather kill switch anyone inst.
    By badassbusaboy in forum Gen II Busa Information
    Replies: 2
    Last Post: 03-31-2009, 04:55 PM
  3. plug and play
    By jch364 in forum Electrical Mods
    Replies: 7
    Last Post: 02-12-2009, 04:55 PM
  4. For those with plug-n-play Speedohealers
    By justintime2 in forum General Bike Related Topics
    Replies: 4
    Last Post: 02-09-2005, 03:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •