Flashing the 08 / ECU Editing software for GEN II Busas

[smithabusa]

i had asked them about that (danosperformance), buying even 10 at a time only save it seemed like 20 bucks per switch, and not worth it to me to spend like $2K in switches knowing i wont sell many etc.

I know MPS sells a little brake switch or something they use for like 10 or 15 bucks, you have to fab a bracket to hold it, and no idea if it works well or not, thought about trying it, but figured if i want one ill just step up, but most likely ill do a cycle-tek co2 kit, they are awesome.

If you can find a better deal on a switch setup for sure let me know, i have looked at those, dynojet, cordonia, those are even more money than these.

Ill wire up whatever you guys want even if you wannna get one and ship it to me etc.

Greg

[smithabusa]

I just checked my notes from when i ordered them before, a little cheaper than i recalled, probably $238 for me to supply 1 with a custom shift rod ready to go, thats shipped priority mail in the USA, would take about a week to get and get shipped to you.

Or if 5 people want them its $20 cheaper, but thats all the break they were offering for 5 at a time, 10 at a time was same price ($20 cheaper) but free shipping, not much of a discount at all.

Greg

[09GraySilverBusa]

Originally Posted by smithabusa

I just checked my notes from when i ordered them before, a little cheaper than i recalled, probably $238 for me to supply 1 with a custom shift rod ready to go, thats shipped priority mail in the USA, would take about a week to get and get shipped to you.

Or if 5 people want them its $20 cheaper, but thats all the break they were offering for 5 at a time, 10 at a time was same price ($20 cheaper) but free shipping, not much of a discount at all.

Greg

Sounds good to me Greg!
Would you mind starting a new thread for a Group Buy? I'm in for one and would be willing to pre-pay so you don't have to be out of pocket for the entire batch. Hopefully we can get at least 5 people to commit.

[smithabusa]

yeah thats cool, thats the only way i could do it, cant spend a grand of my own money without a serious commitment (money LOL)

[09GraySilverBusa]

Originally Posted by smithabusa

yeah thats cool, thats the only way i could do it, cant spend a grand of my own money without a serious commitment (money LOL)

Did you ever start a thread for a group buy on these? I can't find it if you did.

[smithabusa]

No sir I didn't sorry I was thinking you were doing that LOL

[smithabusa]

Okay so I found a better deal, the cardona gp switch has wiring for both push and pull meaning standard or reverse shift pattern could use same switch, and it comes with a generic rod, you have to cut and then tap just one end of it for your install, so custom rearsets this should work also. If need be i could probably measure one up on my bike and have a machine shop do the work if you don't want to.

But anyhow for a cardona gp switch with generic rod, wired to work on the busa with ecu flashing would be about $210 TYD if we can get 4 or more people, $230 TYD if by yourself. I think I will get one myself, and have an overseas customer wanting one, so thats 2 of us so far.

This is what the GP switch looks like, nicer than the dano's performance in my opinion.
Cordona - Race use only!

Greg

[dimosthenis1966]

Now we can throw away all Tre.........
Thank you all.... That was very gooooood news !!!
www.hayabusa.gr

[09GraySilverBusa]

Originally Posted by smithabusa

Okay so I found a better deal, the cardona gp switch has wiring for both push and pull meaning standard or reverse shift pattern could use same switch, and it comes with a generic rod, you have to cut and then tap just one end of it for your install, so custom rearsets this should work also. If need be i could probably measure one up on my bike and have a machine shop do the work if you don't want to.

But anyhow for a cardona gp switch with generic rod, wired to work on the busa with ecu flashing would be about $210 TYD if we can get 4 or more people, $230 TYD if by yourself. I think I will get one myself, and have an overseas customer wanting one, so thats 2 of us so far.

This is what the GP switch looks like, nicer than the dano's performance in my opinion.
Cordona - Race use only!

Greg

Glad to see you got this started. We only need 1 more person in to do this deal!
For anyone thats interested heres the link;
Quick Shifter setup for Gen I/II busas

[smithabusa]

whats that noise crickets make again?

[BLUR]

I just ordered the ECU harness for my GenII earlier today. I figure I fall into your basic sportbike owner as far as simple performance mods go (full exhaust, air filter and PCIII). All I plan on doing at first is bumping up the rev limiter a few hundred, remove the 6th gear speed limiter, and removing the soft limiters. Does the PCIII interfere in connecting/flashing the ecu in any way for just these adjustments or does it need to be removed then reinstalled after the flash?

Thanks
Dave

[smithabusa]

Nope u can leave the pc3 there if you like
Posted via Mobile Device

[lar300mag]

Just recieved my flash cable and shift/launch light, now I have to wait another 3 1/2 weeks till I get off work to check it out. I'm sure I will have a queston or two by the time I get around to mess with it.

[smithabusa]

Ill be here if you do
Posted via Mobile Device