Hayabusa.oRg - Turbo http://www.hayabusa.org/forum Everything about Turbo goes here en Sat, 21 Nov 2009 01:14:36 GMT vBulletin 60 http://www.hayabusa.org/forum/images/busa_retro/misc/rss.jpg Hayabusa.oRg - Turbo http://www.hayabusa.org/forum Rcc electric water pump for hayabusa http://www.hayabusa.org/forum/turbo/121131-rcc-electric-water-pump-hayabusa.html Thu, 19 Nov 2009 15:30:56 GMT RCC ELECTRIC WATER PUMP FOR HAYABUSA This electric water pump flows 5 gallons per minute and draws less than 1 amp. The billet housing bolts... RCC ELECTRIC WATER PUMP FOR HAYABUSA

This electric water pump flows 5 gallons per minute and draws less than 1 amp.

The billet housing bolts right into the stock location, using your stock hoses and no modifications. It greatly reduces your engine temps in stop and go traffic, as the water circulates at the same rate all the time. Using a switched radiator fan, you can run this pump and the fan with the bike not running to cool it down on a hot day, or after a pass. There is enough clearance for billet sprocket covers, slave supports, or cable conversions.

Another plus is the fact that your engine no longer has to push a water pump, freeing up more horsepower!

Great for motor bikes, nitrous bikes, and especially for turbo bikes!

POWERHOUSE PRICE: $499.95
Attached Images
   
]]> Turbo POWERHOUSE http://www.hayabusa.org/forum/turbo/121131-rcc-electric-water-pump-hayabusa.html Pro-Street Turbo ZX-14 http://www.hayabusa.org/forum/turbo/121006-pro-street-turbo-zx-14-a.html Tue, 17 Nov 2009 14:17:04 GMT Guys started a new project for a customer Pro-Street Turbo ZX-14 by HPC, cool thing is I get to run the bike anywhere for three races before he wants... Guys started a new project for a customer Pro-Street Turbo ZX-14 by HPC, cool thing is I get to run the bike anywhere for three races before he wants his bike. So thats cool with me and it keeps the normal 40-50K down for him in the 30's. I have learned a ton from this board in regards to turbo charging by installing turbo kits and of course finally building my own. So if you ask why a ZX-14 on a Busa board.....well I am pretty sure a busa turbo guy will see something that could work on his bike. I am trying all new to the "14" stuff and methanol injection, we were the first water/air intercooled ZX-14...be back with pictures...just getting started and parts are still rolling in...if you hate 14's please read Busa threads...

Greg ]]> Turbo GPW http://www.hayabusa.org/forum/turbo/121006-pro-street-turbo-zx-14-a.html What should I expect from a turbo? http://www.hayabusa.org/forum/turbo/120915-what-should-i-expect-turbo.html Sun, 15 Nov 2009 19:39:26 GMT I am def getting a turbo put on my 2010.Maybe not for a year or so but it will be added on.I'm looking at getting around 300hp.My busa will only see the dragstrip a few times a year so having a reliable bike that doesn't require alot of upkeep and maintaince is very important.

I'm just wondering what I should expect when adding the turbo.As far as upgrades to the engine,cooling system etc.Also how much extra time and money am I looking at to keep the bike properly tuned and running right.

Last will this make my busa more unreilable.I have talked to Richard from RCCturbos and will be having everything installed by him but I just wanted to get some opinions on this.

Also if anyone has any recomendations on other upgrades that I should add to the installation of a turbo.

Thanks ]]> Turbo woodman http://www.hayabusa.org/forum/turbo/120915-what-should-i-expect-turbo.html So it starts http://www.hayabusa.org/forum/turbo/120814-so-starts.html Sat, 14 Nov 2009 02:07:51 GMT well she has a tad over 1000 miles on it, its a time for boost :) Dudes the 08 plastics SUCK!!!!!!!!! Got the plastic off tonight, pulled the oil... well she has a tad over 1000 miles on it, its a time for boost :)

Dudes the 08 plastics SUCK!!!!!!!!! Got the plastic off tonight, pulled the oil cooler and radiator, gonna get them motor out tomorrow.
Pulled off the rider and passenger pegs, brackets, linkage, tiger chain guard, tiger license plate bracket and shipped off to be powdercoated black

Got:
RCC Kit with Carbon Can, 1:1 regulator
GM 3 Bar Map sensor plugged into factory harness, going to use ECU for boost referenced fueling
ECU For gear based boost control

For motor, just going to do:
Ferrara intake / exhaust Valves
65# Valve Springs
APE Head Studs
Cometic .080 spacer and head gasket
Cometic Lower End Gasket Kit
Adjustable Cam Sprocket
HD Clutch Springs
SAE slave support
Galfer Rear Rotor





]]> Turbo smithabusa http://www.hayabusa.org/forum/turbo/120814-so-starts.html Got my Hayabusa Appraised this week............ http://www.hayabusa.org/forum/turbo/120689-got-my-hayabusa-appraised-week.html Thu, 12 Nov 2009 03:51:12 GMT Finally decided to get my 2002 Hayabusa Appraised this week. I had been putting if off for several months. Not knowing what to expect, I went into... Finally decided to get my 2002 Hayabusa Appraised this week. I had been putting if off for several months. Not knowing what to expect, I went into it knowing very little. I have just over 11K into mods on the bike & I paid $6,500 for it 5 years ago! The appraiser put a value of $25,000 on the bike. I was freaking shocked!::25
What do you guys think? I could build a hell of a new bike for $25,000! :laugh:
I had it appraised to help secure financing & update my insurance in case the worst happens. :please:
Attached Images
 
]]> Turbo kawiboy11 http://www.hayabusa.org/forum/turbo/120689-got-my-hayabusa-appraised-week.html who?? http://www.hayabusa.org/forum/turbo/120676-who.html Thu, 12 Nov 2009 01:29:27 GMT OK im trying to get my turbo done but after that i need a good tune center. Im in Kansas and i was wandering who is close to me... OK im trying to get my turbo done but after that i need a good tune center. Im in Kansas and i was wandering who is close to me thanks:thumbsup::whistle: ]]> Turbo busataz http://www.hayabusa.org/forum/turbo/120676-who.html <![CDATA[Let's see some of those turbo busa]]> http://www.hayabusa.org/forum/turbo/120547-lets-see-some-those-turbo-busa.html Mon, 09 Nov 2009 20:08:36 GMT just post your pic and ur basic set up(ex: hahn stage one, rcc stage 2, volicety stage 3, rcc super ultra) just post your pic and ur basic set up(ex: hahn stage one, rcc stage 2, volicety stage 3, rcc super ultra) ]]> Turbo LeDauz http://www.hayabusa.org/forum/turbo/120547-lets-see-some-those-turbo-busa.html Stainless steel throttle blades http://www.hayabusa.org/forum/turbo/120529-stainless-steel-throttle-blades.html Mon, 09 Nov 2009 14:36:02 GMT STAINLESS STEEL THROTTLE BLADES FOR HAYABUSA It is no secret that good replacement throttle blades are very hard to find for the Hayabusa. There... STAINLESS STEEL THROTTLE BLADES FOR HAYABUSA

It is no secret that good replacement throttle blades
are very hard to find for the Hayabusa. There are
several "big name" "race" distributors selling
absolute crap - ill-fitting, sloppily machined
throttle plates that cannot be synchronized and make
your bike idle at 2,000 rpm.

Our throttle blades are NOT "made in the USA", and in this case, thats good!

POWERHOUSE PRICE: $135


::4::4
Attached Images
 
]]> Turbo POWERHOUSE http://www.hayabusa.org/forum/turbo/120529-stainless-steel-throttle-blades.html big bore with turbo? http://www.hayabusa.org/forum/turbo/120511-big-bore-turbo.html Mon, 09 Nov 2009 03:17:20 GMT was woundering how well haveing a big bore(1397cc, 1441cc, 1507cc) and a turbo go together? and problems/concerns? or just genral knowlege/ideas? was woundering how well haveing a big bore(1397cc, 1441cc, 1507cc) and a turbo go together? and problems/concerns? or just genral knowlege/ideas? ]]> Turbo LeDauz http://www.hayabusa.org/forum/turbo/120511-big-bore-turbo.html <![CDATA[Turbo cams & timing]]> http://www.hayabusa.org/forum/turbo/120468-turbo-cams-timing.html Sun, 08 Nov 2009 04:59:43 GMT Is it worth putting an intake cam on the exhaust ? If not, does any body adjust cam timing with stock inlet & exhaust. Running a GT28, Hahn port fueller, water/meth cooling, carillo rods, coated pistons. .080 base plate.
Thanks in advance. ]]> Turbo auzbusa http://www.hayabusa.org/forum/turbo/120468-turbo-cams-timing.html turbo? http://www.hayabusa.org/forum/turbo/120276-turbo.html Wed, 04 Nov 2009 09:30:52 GMT Does anybody know what rcc's stage 1 turbo is equivalent to say like a garret T-25 etc.. ]]> Turbo 07vigorblue http://www.hayabusa.org/forum/turbo/120276-turbo.html turbo insurance http://www.hayabusa.org/forum/turbo/120252-turbo-insurance.html Tue, 03 Nov 2009 22:13:04 GMT Hi guys I am looking to get a rcc stage 1 this winter. I have started breaking the bike down and got a call from State Farm and they said if I do... Hi guys

I am looking to get a rcc stage 1 this winter. I have started breaking the bike down and got a call from State Farm and they said if I do go turbo it will void my policy. Can any of you guys tell me who you are using?

FYI around toronto ontario canada if you can.

Thanks ]]> Turbo hosinfefer http://www.hayabusa.org/forum/turbo/120252-turbo-insurance.html MSD SB6 on Turbo http://www.hayabusa.org/forum/turbo/120094-msd-sb6-turbo.html Sat, 31 Oct 2009 19:46:50 GMT Hey Guys.. How well does it work on turbo aplications? Any Thoughts welcome... Gracias. Fernand. Hey Guys..

How well does it work on turbo aplications? Any Thoughts welcome...

Gracias.
Fernand. ]]> Turbo luisitoboost http://www.hayabusa.org/forum/turbo/120094-msd-sb6-turbo.html Wossner turbo pistons, h-beam rods http://www.hayabusa.org/forum/turbo/120088-wossner-turbo-pistons-h-beam-rods.html Sat, 31 Oct 2009 17:02:15 GMT *WOSSNER TURBO PISTONS* Powerhouse Motorcycles now has Wossner turbo pistons in stock for the Busa. These pistons from Germany are gas ported,...
WOSSNER TURBO PISTONS

Powerhouse Motorcycles now has Wossner turbo pistons in stock for the Busa. These pistons from Germany are gas ported, come with .180" wall pins, and have a moly coat treatment on the skirts. They are 9:1, and much better than anything we have used to date. $550/set of 4

We also have their H-Beam rods in stock: made from the same material as Carrillos, they come with 3/8" ARP L19 bolts . . .
Attached Images
  
]]> Turbo POWERHOUSE http://www.hayabusa.org/forum/turbo/120088-wossner-turbo-pistons-h-beam-rods.html Help http://www.hayabusa.org/forum/turbo/120075-help.html Sat, 31 Oct 2009 14:52:18 GMT Ya i just got my mr turbo kit from on here and i was woundering if anybody had a install guide????? i sent richard a message but if anyone has one i... Ya i just got my mr turbo kit from on here and i was woundering if anybody had a install guide????? i sent richard a message but if anyone has one i could get i would like that. thanks mike :thumbsup::thumbsup::please: ]]> Turbo busataz http://www.hayabusa.org/forum/turbo/120075-help.html