How many miles on the pads and rotors![]()

My front brakes squeak after having the tires changed.
When I apply pressure to the front lever the squeel stops. I pulled the pads but I don't see anything wrong. Ater reinstalling the pads iy still sqeaks!!!
Anyone know where I should look next??
Thanks,
Shawn
How many miles on the pads and rotors![]()
I don't know how many miles on the pads. The rotors are stock.
<div>
(first vr4 @ Sep. 09 2007,16:06)</div><div id="QUOTEHEAD">QUOTE</div><div id="QUOTE">I don't know how many miles on the pads. The rotors are stock.</div>
How many miles on the bike ? What year ?
Approx 9800 miles. 2001
I just got the tires changed yesterday?
You can try cleaning the rotors with some brake cleaner. You can get some at any auto parts store...just spray some on a rag and wipe down the rotors.
With that many miles you should also have the rotors checked...minimum thickness is 4.5mm I believe.
I did clean the rotors with brake cleaner. Still the same. I'll measure the rotors. But the rotor thickness wouldn't cause the squeaking would it?
<div>
(first vr4 @ Sep. 09 2007,16:22)</div><div id="QUOTEHEAD">QUOTE</div><div id="QUOTE">I did clean the rotors with brake cleaner. Still the same. I'll measure the rotors. But the rotor thickness wouldn't cause the squeaking would it?</div>
You may just need to put some miles on the bike...the pads leave some of the brake material on the rotors. This
is normal, by changing tires and cleaning the rotors everything is a bit out of sync. If they only concern is a squeak, but
the bike stops properly...give it a couple of hundred miles before you panic![]()
Is that right? 98000 not 9800? Wow, check rotor thickness. Probable only need to clean them with brake clean.
2006 Limited Busa
1998 Black bird in need of carb work
1997 ZX9R still fun to ride
2006 GPW built THOR. - Sold
Thanks for building a great bike Greg. And DJ for parting with it.
humidity...![]()
One in every crowd...Scar, Aug. 13 2008, 4:56 AM
Sorry!! 9800 miles![]()
Might just need pads. Try brake clean.
2006 Limited Busa
1998 Black bird in need of carb work
1997 ZX9R still fun to ride
2006 GPW built THOR. - Sold
Thanks for building a great bike Greg. And DJ for parting with it.
Rotors measure 4.9 mm
Well go "ride it like you stole it"![]()
<div>
(BA BUSA @ Sep. 09 2007,19:52)</div><div id="QUOTEHEAD">QUOTE</div><div id="QUOTE">Well go "ride it like you stole it" *</div>
![]()
04 Blue/Silver:
Chrome RS-3's
Power Commander
16/42
hump mod (inside and out)
dampner mod
K&N
EBC pads & rotors
screens
Suzuki gel seat
busa hand grips
air box mod
galfer front lines
Throttlemeisters
Put brake grease on the back of the pads and where it mounts. THat should quiet it down![]()
I used to own:
'00 zx9r ninja
'05 dodge magnum
But they were taken away from me
Pictures of a few GTGs.
1 @ Wilmington
1 @ Mount Morrow
1 @ Greensboro
Spring Busa Bash 08
Checkout:
www.186pix.com
Speed Restricted pix
I had the same problem when I had to let a Honda stealership put a tire on the front. They were the only one that had a discontinued tire and I didn't want to buy a whole new set.
Check the torque on the axle. When I got mine home, the axle was WAYYYYYYYYYYY over tight and the pinch bolts were barely tight at all. I loosened everything and tightened to proper spec, the squeak went away.
Don
2004 Limited - Sold
2005 Limited - Sold





try sprayin some simple green up in your calipers and then hose them off... *had this problem with my pads previously and they just needed to be rinsed of brake dust
"safe aint real fast.. sponsors dont like safe... safe dont pay good..." Nicky Hayden
04 blk/purple SOLD
02 GSXR750- Racebike

