Newbie question on power commander

itr714

Registered
Hi all guru out there, I'm a new owner of an 06 busa and I have one question. Is the power commander a piggy back system to the ECU unit?, meaning I can just unplug it and the bird will run on stock setting? The shop that sold the bike to me say it's equiped with PC and I found the FC are quite bad, so I would like to try on stock setting.

Any info/comment are deeply appriciated.
 
You can unplug it but you will need to unhook the injector connections and plug the back online. The lower injector connections are looped through the PC. Unplug all 4 injector connections going to PC and plug them back up direct.
 
You can unplug it but you will need to unhook the injector connections and plug the back online. The lower injector connections are looped through the PC. Unplug all 4 injector connections going to PC and plug them back up direct.

He has a 2006 Gen1 Busa...the PC does not hook up to the injectors. All that is needed is to lift the tank and unplug the PC from the main harness...then reconnect the stock connection.
Posted via Mobile Device
 
Back
Top