HELP -02 BUSA Will NOT RUN, Where is the crank position sensor..?

[chat_vmax]

HELP -02 BUSA Will NOT RUN,
changed the stator cover and motor will not run ;((

Hello all,
Im posting for a friend with a 2002 busa,,,
all stock..
BUT he decided to put a after market cover on in place of the stock stator cover,, after he buttoned it up it will not start,,

Motor cranks and backfires out the exhaust,,
Questions:
1: He removed the stator and put it inside the aftermarket cover,, is there a crank position sensor or something built into the stator,,,?

2: is there ANYTHING under that cover that can cause a timing issue... that is what appears to be the issue..

He is very dilegent and has sworn there is NO pinched wires or anything and asked me the above questions,,,
I told him i would post but thought thatthe bike would run without the stator even plugged in,,, ??

SO what could be the issue....

Thanks for your

 

[kromdom]

p. 117 of the service manual. d/l a copy here: Service manuals for Suzuki GSX-R Motorcycles, free download of service manuals for your GSXR bikes

 

[RYC1966]

The pick up that is associated with the stator...inside the stator cover sits really close to the stator. It is possible that the cover will go on ok, but when the engine is fired it will contact the pick up and either destroy it or cause issues. Mine broke the first time...good luck. I believe the pick up part is for timing.