Vacuum routing need help asap.

1Falcon989

Registered
Need to know where the vacuum line goes that runs between the two left throttle bodies then into a tee. One side of the tee has a long line leading to the right side of the motor and the other side is a very short line which is what I'm having trouble with... Need help asap! Thanks.
 
Figured it out.... Now what attatches to this vacuum valve?
IMG_0332.jpg
 
the sensor in your pic looks like the APS (atmospheric pressure sensor, aka-Static pressure) no hose gets connected to that one. The vacuum hose from the TB's should connect to the IAPS (intake air pressure sensor). It's located in a similar spot. If I recall correctly the APS sensor only has two lead wired while the IAPS has three wires.
 
Back
Top