I screwed up and need help....

[BoricuaBusa33]

I'm stuck and need you guys help..... I took the tail off so I would have more space to cut the mud flap. Everything went perfect putting everything back together, and installed the Hump back on.
Well, I went to open the Hump again and it won't open, at that time I realized that I tottaly forgot to hook back again the release cable. So now I can't open itttttttt

What should I do? BTW, Yes I know, I'm an idiot...

[BoricuaBusa33]

BUMP..... Come on guys.... help a brother out....

[Mr Bogus]

do a quick search... been covered a few times.

[BoricuaBusa33]

do a quick search... been covered a few times.

I did, and found a few methods... thanks a lot.... I just thought I was the only idiot to have done this....

[Mr Bogus]

I did, and found a few methods... thanks a lot.... I just thought I was the only idiot to have done this....

You are going to have to work pretty hard to be the first guy to do anything with a busa... after 10 years, just about every crackpot screw up has been done at least a hundred times Lucky for us all, guys share the fixes too

[mike1180]

This is the way I would do it (if it ever happened to me )
Hump locked on (I searched)
It works, but there were some posts about prying up the side and reaching in with a rod.

[dadofthree]

Good Luck

[Bansh]

good info

[Busakid08]

DONT DRILL - you can do it without drilling and a little patients, took me about 10mins but eventually got it with a coat hanger with teh side pryed up a little IT CAN BE DONE .... which is also scary cos you then realise that anyone can do it

[BusaWizard]