FI Problems

There is a whole section in my manual about those 4 codes.
Basically there is no injector current.

Look in the FI section for faults with those codes, (page 4-48 in mine.)
Good luck!
 
I changed the sparkplugs in my `05 & unplugged the green sensor on the LH side of the airbox & one vaccume line to gain access to my plugs. It runs & reves good but the FI light is on! I have no manual because I bought it used? Please help??? Thanks...
 
im not sure if this can help you or not, i hope so..

List of dealer mode malfunction codes that are displayed when the MSW is on

C00 none
C11 cam shaft position sensor (CMP sensor)
C12 Crankshaft position sensor (CKP sensor)
C13 Intake air pressure sensor (IAP sensor)
C14 Throttle Position sensor (TP sensor)
C15 Engine coolant temp sensor (ECT sensor)
C21 Intake air temp sensor (IAT sensor)
C22 Atmospheric pressure sensor (AP sensor)
C24 Ignition signal #1 (IG coil #1)
C25 Ignition signal #2 (IG coil #2)
C26 Ignition signal #3 (IG coil #3)
C27 Ignition signal #4 (IG coil #4)
C31 Gear Position signal (GP switch)
C32 Injector signal #1 (FI #1)
C33 Injector signal #2 (FI #2)
C34 Injector signal #3 (FI #3)
C35 Injector signal #4 (FI #4)
C41 Fuel pump control system (FP control system)
C42 Ignition switch signal (IG switch signal)
C92 Fuel level gauge signal (Gauge sending unit)

If there is more than one code present it will be indicated from small code number to larger code number.
 
Back
Top