[sportrider1296]

This is some pics of the air box mod that I worked on this morning at 3 am because I became board. Man I hate when that happens! Anyway I did the usually drilling and hacking like the brock website describes and I desided to eliminate the valve on the bottom side of the box. I used a piece of the flapper valve that I remove since it is the same material as the box and melted it to the box using my hot air plastic welder from harbor freight ($29)! Or you can use a soldering iron. It was easy and eliminated a very small amount of weight. Just thought I would post for others to maybe consider. Now off to bed, tired. Any questions just ask.